Rockville DS10 2-Channel Power Amplifier 4000W Peak / 1000W RMS, 1U Rack Mount, Class D, Pro Audio DJ Amp for Speakers or Subs

Price: $179.95
(as of May 10, 2026 02:51:28 UTC – Details)

Product description

Rockville DS10 4000 Watt Peak/1000w RMS 2 Channel Power Amplifier 1U Rack Pro Amp

Power Ratings:

RMS Power Output:

Stereo 4 Ohm: 2 x 500WStereo 8 Ohm: 2 x 300WBridged 8 Ohm: 1 x 1000w

Peak Power Output:

Stereo 4 Ohm: 2 x 2000WStereo 8 Ohm: 2 x 1200WBridged 8 Ohm: 1 x 4000w

Terminals:

Input Terminals:

XLR Ch1 & Ch2 inputs

Output Terminals:

Speakon outputs Ch1 & Ch2

Features:

Rockville DS10 1000w RMS Class D 2 Channel Power Amplifier Pro/DJ Amp1U rack space and only 6.6 LbsBuilt in crossover switch (full range, 110 LPF Hz, 110 HPF Hz) allows amp to be used with full range PA speakers, or Subwoofer(s)Front Panel displays volume in dB per channel via LEDSBuilt in limiter protects your speakers from distortion and clippingPower, signal, limit, and fault LED indicators on front of ampSpeaker short circuit, thermal over load, DC over loadBuilt-in variable speed quiet cooling fansStereo mode is perfect for (2) speakers or (4) speakers in a left and right configurationParallel mode gives you dual mono output signal which is perfect for monitor use when you want all sounds coming out of each speaker instead of a left/right configurationChannel 1 & 2 Limiting Led IndicatorsChannel 1 & 2 Separate Level ControlsHeavy duty rack mount ears and removable feet give you multiple optionsLevel controls for precise setting and matching of sensitivityCan power (2) or (4) 8-ohm speakers, (2) 4-ohm speakers (4) or (8) 16-ohm speakersUser serviceable fuse (10A, 250V)Frequency Response:10 Hz – 40 Khz at +/-3dBInput Impedance: 10K Ohm BalancedInput signal sensitivity: 540mV – 2.5VStereo Separation (Crosstalk) : -57.7dB at 5kHzDamping factor: ( 100Hz, 10w, 4 ohms): 165Output impedance at speaker terminals: 0.0836 OhmsTHD+N vs Frequency <0.07% at 1 Watt RMS 20Hz-20kHzSignal-to-Noise: 90 dBA max outputSLEW RATE (input filter limited) : 29v/uSPower Requirements: 110V / 50-60HzDimensions: 19” x 10.24” x 1.97”

Key Features:

True 1000W RMS Power: 2 x 500W @ 4Ω / 2 x 300W @ 8Ω / 1 x 1000w @>Slim & Lightweight: Only 6.6 lbs and 1U rack-mountableVersatile Crossover: Choose Full Range, 110Hz LPF, or 110Hz HPFSmart Protection: Built-in limiter, thermal, DC Overload & short circuit protectionQuiet Cooling: Variable Speed low-noise fans prevent overheating (speed increases as temperature increases)Pro Connectivity: XLR inputs & Speakon outputs for secure connectionsStereo & Parallel Modes: Use for two speakers, four speakers, or monitors

With high efficiency, rock-solid reliability, and unmatched power for the price, the Rockville DS10 is the perfect amplifier for DJs, bands, event venues, and pro audio setups. Whether you’re running a high-energy gig or or powering speakers in your restaurant, this amp delivers the clean, punchy sound you need – without the bulk.

High‑Fidelity Power & 10Hz–40kHz Response: Delivers a true 1000W RMS @ 8Ω bridged (4000W peak) with an ultra‑wide 10Hz–40kHz frequency range. From deep sub‑bass to crisp highs, the amplifier maintains fast, clean, and distortion‑free dynamics even during demanding transient peaks.
Stereo, Parallel (Dual Mono), & Bridged Modes: Maximum versatility for any rig. Use Stereo for L/R mains, Bridged for a single 1000W sub, or Parallel Mode for a dual-mono signal. Parallel mode is essential for monitor setups, allowing you to run the same mono signal to multiple monitors while maintaining independent volume control.
Built-in 110Hz Crossover for Subs & Tops: Eliminate the need for external gear with the integrated 3-way crossover switch (Full Range, 110Hz LPF, or 110Hz HPF). With a damping factor of 165, the DS10 provides the “grip” needed to control subwoofer cones for tight, accurate bass rather than muddy, loose sound.
Pro-Grade Stability & Low Noise: Engineered with a Signal-to-Noise ratio of 90dB and THD+N <0.07%, ensuring your audio remains clean even at high volumes. The variable-speed quiet cooling fans and 1U slim chassis allow for dense rack mounting without the risk of overheating or excessive mechanical noise.
Comprehensive Protection & Monitoring: Features a built-in limiter and 540mV–2.5V input sensitivity matching to protect your drivers from clipping. The front panel provides real-time feedback via dB LED meters, while internal circuitry guards against short circuits, thermal overload, and DC offset to keep your gear safe.

Product summary

shift
+
opt
+
D